Integra MEDIAJET - Page 9

MEDIAJET – Operating instructions V09 Description of the device
9
www.integra-biosciences.com
Base plate for filling nozzle holder for Petri
dishes with a height above 21 mm
(Part No. 103 212) or
Base plate for filling nozzle holder for Petri
dishes with a height above 21 mm
(MEDIAJET vario with biplate option only)
(Part No. 113 821)
Tubing set, including 1.5 m silicone tubing and
filling nozzle (two sets for MEDIAJET vario with
biplate option)
(Part No. 103 030 or 113 030)
Spirit level
(Part No. 103 095)
Line cord
Conversion set installed, applies to MEDIAJET
vario only,
(Part No. 113 051, 113 055, 113 052, 113 056
or 113 053)