Integra VIAFLO 96 - Communications; Device Information; Language

VIAFLO 96/384 – Operating instructions V11 Installation
www.integra-biosciences.com 19
3.4.6 Communications
VIAFLO 96/384 can be programmed from a PC via USB communication cable (type A to
B).
3.4.7 Device Information
In addition, information about your VIAFLO 96/384, such as serial number, the firmware
(FW) and hardware (HW) version of the control unit and of the base unit are displayed.
3.4.8 Language
Communi-
cations
Description
VIALINK Connect the USB cable betweenVIAFLO 96/384 and a PC. Press OK to
begin bi-directional communication. To exit the communications mode
turn off VIAFLO 96/384.
Device
Information
Description
VIAFLO 96/
384
Owner: Press  to enter the user name for your pipette. Use the Touch
Wheel to highlight a character and press OK. You can press  to Delete
the last character entered. After entering the desired text, press  to
Save.
Language Description
Language You can choose the language in which all screens are displayed. Scroll to
the desired language, press OK and  to Save.