40
CHAPTER 4
Intel Express 460T Standalone Switch Users Guide
Port-based VLAN
You configure a port-based VLAN by creating the VLAN and then adding
participating ports. The switch can support up to 12 port-based VLANs.
However a port can be a member of only one VLAN; port-based VLANs
cannot overlap.
To configure a port-based VLAN
1 Click the Configure VLAN menu and then click Port-based VLAN.
2 Click Add to create a new VLAN, or select a VLAN and click Edit to
change its configuration.
3 If you are creating a new VLAN, type a name in the VLAN Name box.
4 In the Available ports box, select a port to add to the VLAN and click
Add.
5 Click Submit.
To Next Page
