Windows XP Information
D - 12 Attaching Other Displays
D
To Enable Intel(R) Dual Display Clone (Intel GMA)
1. Attach your external display to the external monitor port, and turn it on.
2. Go to the Intel(R) GMA Driver for mobile control panel and click Display Devices.
3. Click to choose Intel(R) Dual Display Clone (Operating Mode).
4. Click Apply, and OK to confirm the settings change.
5. Click Display Settings to adjust the settings for the attached devices.
Figure D - 8 - Display Devices - Intel(R) Dual Display Clone
To Next Page
Loading...
