Windows XP Information
D - 42 PC Camera Module
D
PC Camera Driver Installation
1. Make sure the module is powered on, and then insert the Device Drivers & Utilities + User’s Manual
disc into the CD/DVD drive.
2. Click Option Drivers (button).
3. Click 2.Install Camera Driver > Yes.
4. Choose the language you prefer and click Next.
5. Click Next > Finish to restart the computer.
6. Run the BisonCap application program from the BisonCam shortcut on the desktop, or from the
BisonCam item in the Start > Programs/All Programs menu (if the hardware is turned off use the Fn
+ F10 key combination to turn it on again).
To Next Page
Loading...
