93
Using AptusNX
Ship Setting
System Setting
This menu sets and displays the Ship, Antenna, Satellite, Network, Modem/BUC, SNMP, Backup & Restore and
Mediator function.
No. Item Description
1
Ship Sets the ship information and block zone.
2
GPS
Sets the GPS position of the vessel for searching for a satellite. Check the GPS
status connected to the antenna system. The indicator left of the help button
shows the GPS status. Please conrm the GPS indicator is Blue (blinking). (Blue
(blinking): the system received a correct GPS input. Black: the system has not
received a GPS input. You can enter the GPS value manually to set the GPS
position.)
• Longitude(º): sets Longitude information (East / West).
• Latitude(º): sets Latitude information (North / South).
Click the "Apply" button to apply the settings to the system.
1
2
3
4
5
To Next Page
Loading...
Need help?
General
