Intellian v100NX - Setting up Modem Configuration

48
Operating Install Wizard
Setting up Modem Conguration
Before starting installation wizard, set up the modem conguration.
1. After accessing the AptusNX main page, go to the "SETUP"
"Modem/BUC" on the main menu then
follow these steps.
2. Select your modem type from the "Select Modem" drop-down list for loading a pre-conguration for
the type of modem used. The settings related to the modem interface will be set automatically once
the modem type is selected. When you select "USER SETTING", the other settings can be changed
independently. Check the "Apply" button.
3. Enter the modem setting values to congure the modem. Refer to the option le supplied from the service
provider. Check the "Apply" button.