Intermec CK30

Chapter 4 — Managing the CK30
CK30 Handheld Computer User’s Manual 101
To back up your files
1 Press C and then B to open the System Main Menu.
2 From the System Main Menu, go to Configuration Utility >
Device Settings > File Backup.
3 Select Backup Files Location and choose the location where
you want your files to be backed up.
4 Press Enter to save your selection.
5 Select Backup the File System.
A copy of all your files is saved to the \Persistent Copy folder
in your desired location.
6 Press Esc until you exit the menu system.
Upgrading Your CK30
There are two ways to upgrade your CK30:
• You can upgrade your computer using an SD card.
• You can upgrade your computer using SmartSystems
Console.
When you remotely upgrade your computer, you are updating
the operating system and the embedded Intermec Value Add
(IVA) files.
Upgrading the Operating System Using an SD Card
To upgrade the operating system, you need:
• an SD card
• an SD card reader (optional)
• the latest upgrade file. This file is available from the Intermec
web site at www.intermec.com. Go to Service & Support >
Downloads. Make sure the file you select is for your
language.
You can use any file transfer method (ActiveSync, FTP server,
and so on) to copy the upgrade files to your SD card. Intermec
recommends using an SD card reader.