Chapter 5 — Running Diagnostics
CK30 Handheld Computer User’s Manual 109
Click the X to close the dialog box. The dialog box continues to
appear until the backup battery is fully charged. You must install
a fully charged main battery or place the CK30 in a charger. It
takes about 15 minutes for the backup battery to charge up to
2.4V.
If the Backup Battery Very Low dialog box continues to appear
for more than 15 minutes, view the Battery Information
diagnostic screen. If the Supercap Flag field is not Charging,
the backup battery may have failed. You may need to send the
CK30 to Intermec to have the backup battery replaced. For help,
see “Calling Product Support” on page 124.
Bluetooth Console
The Bluetooth Console is a tool that helps to debug the
Bluetooth driver.
You can use the Bluetooth Console to perform several Bluetooth
diagnostics, such as deciding whether Bluetooth hardware was
recognized and initialized correctly, setting a PIN, and
establishing an L2CAP connection between two Bluetooth
devices. For more information on using the Bluetooth Console
(or BDTC), visit the Microsoft web site.
To open the Bluetooth Console diagnostic
• Go to Diagnostics > System Diagnostics > Bluetooth
Console.
To Next Page
Loading...
