Intermec CK30

Appendix C — Reprogrammable Keypad
174 CK30 Handheld Computer User’s Manual
For example if one .reg file contains:
[HKEY_LOCAL_MACINE\HARDWARE\DEVICEMAP\KEYBD]
"ScancodeFilterArray"=hex:\
0a,00,00,00,04,00,00,00,00,00
And the other .reg contains:
[HKEY_LOCAL_MACINE\HARDWARE\DEVICEMAP\KEYBD]
"ScancodeFilterArray"=hex:\
11,00,01,00,03,00,00,00,00,00
"KeyFilterProcess0x111"="\Windows\cmd.exe"
"KeyFilterCmd0x111"="test"
Your combined reg file should look like this:
[HKEY_LOCAL_MACINE\HARDWARE\DEVICEMAP\KEYBD]
"ScancodeFilterArray"=hex:\
11,00,01,00,03,00,00,00,00,00,
0a,00,00,00,04,00,00,00,00,00
"KeyFilterProcess0x111"="\Windows\cmd.exe"
"KeyFilterCmd0x111"="test"
Creating Keypad Macros
A keypad macro is a sequence of keys mapped to a single key or
key combination. Keep the following considerations in mind
when programming with macros:
• You can only use one macro at a time.
• Do not use scan triggers in macros because they are timing
dependent.
• Avoid using key sequences that launch applications because of
timing issues.
• The best use of macros is as a tool for repetitive data entry.
Use this table to understand the macro icons that appear in the
status bar.
Icon Description
You are recording a macro.
You are deleting the macro.
You are playing the macro.