Intermec CK30

Chapter 1 — Using the CK30 Handheld Computer
CK30 Handheld Computer User’s Manual 21
Understanding the CK30 Status Lights (continued)
Light Name Light Description
Ready-to-Work™
indicator
This blue light indicates when the CK30 is ready to
use TE 2000.
Light Status What It Means
Off TE 2000 has not loaded
successfully.
Blinking The CK30 is not connected to
the host.
On A connection to the server has
been established and all network
connections are active. You can
use TE 2000.
Understanding the Beeps
The CK30 uses beeps to provide you with audio feedback when
it performs some functions. For example, you hear a beep each
time you scan a valid bar code.
Understanding the CK30 Beeps
Beep Sequence What It Means
High beep You entered valid data or a valid command, the
CK30 decoded a label, or the CK30 decoded
the last row of a two-dimensional bar code.
Three low beeps You entered or scanned an invalid command.
Click You pressed a key.
You can change the beeper volume for your needs and
environment. You can set the beeper volume to off, low (quiet),
medium, high (loud), and very high (very loud - default). If
necessary, you can also change the beep duration and beep
frequency for good read, low, and high beeps.