Intermec CK30

Chapter 2 — Configuring the CK30
CK30 Handheld Computer User’s Manual 69
Loading a Certificate
If you choose to use transport layer security (TLS) with WPA or
802.1x security, you need to have a unique client certificate on
the CK30 and a trusted root certificate authority (CA)
certificate. You can use a third-party CA to issue unique client
certificates and a root certificate.
There are three ways to load certificates on the CK30:
• If you are using Active Directory® to issue certificates, you
can use the Enroll Certificates application to load the
certificates.
• If you are using another third-party CA, you can use the
Import Certificates program to load the certificates.
• If you have multiple certificates to install, you can use the
Import Root Certificates and Import User Certificates
functions.
Note: For certificates to be valid, the CK30 must be set to the
correct date and time. After cold booting the CK30, you may
need to correct the date and time.
To load certificates if you are using Active Directory
1 Configure the network and radio settings for the CK30 to
communicate with your certificate authority.
2 From the Configuration Utility, select Communications >
802.11 Radio > Certificates.
3 Select Enroll Certificates. The Enroll Certificates dialog box
appears.