Intermec CK30 User Manual

Chapter 2 — Configuring the CK30
CK30 Handheld Computer User’s Manual 57
b Select the text in the box, type a meaningful name, and
press Enter.
7 Configure your security settings.
8 (Optional) Repeat this process for each profile you want to
define.
9 Select one profile as the active profile by selecting Active
Profile and choosing a profile from the list.
10 Save your settings.
Selecting Microsoft as Your Security Choice
The default security setting is Funk. If you want to use
Microsoft security, you need to select it as your security choice.
To select Microsoft security as your security choice
1 Press C and then B to open the System Main Menu.
2 Select the Configuration Utility.
3 Select Communications > 802.11 Radio > Security Choice.
4 From the Security Choice list, select Microsoft Security.
5 Press Enter. An alert box appears telling you that you must
save your settings and warm boot the CK30 for your new
security choice to take effect.
6 Select Yes and press Enter.
Your CK30 warm boots and your new security choice is
Microsoft security.
Configuring WPA Security
Wi-Fi Protected Access (WPA) is a strongly enhanced,
interoperable Wi-Fi security that addresses many of the
vulnerabilities of Wired Equivalent Privacy (WEP). Instead of
WEP, WPA uses Temporal Key Integrity Protocol (TKIP) for
its data encryption method.
Currently, WPA satisfies some of the requirements in the IEEE
802.11i draft standard. When the standard is finalized, WPA
will maintain forward compatibility.

Intermec CK30 Specifications

Capacity and Output Specifications

Maximum output	8.4 VDC
Mean output	7.4 VDC
Capacity	2400 mAh

Temperature and Humidity Specifications

Operating temperature	-20°C to 50°C (-4°F to 122°F)
Storage temperature	-20°C to 60°C (-4°F to 140°F)
Humidity	0 to 95% non-condensing

Weight and Dimensions

Dimensions	82.5 x 63.5 x 22 mm (3.25 x 2.65 x 0.9 in)
Weight	132 g (4.64 oz)