Chapter 1 — Using the CK30 Handheld Computer
CK30 Handheld Computer User’s Manual 15
3 Select Device Settings > Keypad. The Keypad settings screen
appears:
4 Choose the function you want to disable from the Keypad
menu, select Disable from the function dialog box, and then
press Enter.
5 Exit the Configuration Utility.
To change the I key functionality
1 Press C and then B. The System Main Menu appears.
2 Select the Configuration Utility.
3 Select Device Settings > Keypad.
4 From the Keypad menu, select Configure Boot
Functionality.
5 Choose Warm Boot or Cold Boot and then press Enter.
6 Exit the Configuration Utility.
Using the Screen
The CK30 can have either a color or monochrome display
depending on the model. Both screens are 160 x 160 pixels. The
desktop is 160 x 140 pixels and the taskbar is 160 x 20 pixels. In
addition, the screens support Unicode characters, user-
programmable fonts, and bitmap graphics.
To Next Page
Loading...
