Intermec CK30

Chapter 2 — Configuring the CK30
56 CK30 Handheld Computer User’s Manual
Choosing Between Funk and Microsoft Security
The CK30 provides both Funk and Microsoft security choices.
Funk security is the default setting. Use the following sections to
set security using either Funk or Microsoft as your security
choice.
Both Funk and Microsoft offer similar features, but Funk
security also offers these features:
• CCX v2.0 compliance
• Support for LEAP and TTLS
• Configuration of up to four profiles
If you want to use the default Funk security, you need to select a
profile. For help, see the next section, “Selecting a Profile for
Funk Security.”
If you want to use Microsoft security, you need to select it as
your security choice. For help, see “Selecting Microsoft as Your
Security Choice” on page 57.
Selecting a Profile for Funk Security
You can define up to four profiles for Funk security. Different
profiles let your CK30 communicate in different networks
without having to change all of your security settings. For
example, you may want to set up one profile for the
manufacturing floor and one for the warehouse.
By default, the active profile is Profile 1.
To select a profile for Funk security
1 Press C and then B to open the System Main Menu.
2 Select the Configuration Utility.
3 Select Communications > 802.11 Radio > Funk Security.
4 Select Active Profile, choose a profile from the list, and press
Enter.
5 Select the active profile to expand it.
6 (Optional) Give your profile a meaningful name:
a Select Profile Label and a dialog box appears.