Chapter 6 — Troubleshooting and Maintaining the CK30
CK30 Handheld Computer User’s Manual 137
To warm boot the CK30
• Press and hold I for 5 seconds. The CK30 tells you it is
performing a warm boot and the screen comes back up to the
start screen.
Cold Booting the CK30
If the CK30 or application is locked up and does not respond to
a warm boot, follow this procedure to perform a cold boot.
When you perform a cold boot, all data in your RAM storage is
deleted. To make a backup copy of everything in your RAM-
based storage system, see “Backing Up Your Files” on page 100.
To cold boot the CK30
1 Remove the battery.
2 Using a small pointed object (such as the end of a paper clip
or pen), press the reset switch on the backside of the CK30.
CK30AA0301000
Reset
switch
Do not use force or a sharp object when pressing the reset
switch. You may damage the reset switch.
3 Replace the battery.
To Next Page
Loading...
