Appendix C — Reprogrammable Keypad
CK30 Handheld Computer User’s Manual 165
7 Select the Entry Mode for the Unicode character.
Entry
Mode
Description
Literal You enter the actual character that the key
combination produces.
Hex You enter a hex string. The hex string must be
preceded by 0x. The range is from 0x0 to 0xFFFF.
Decimal You enter a decimal string. The range is from 0 to
65535.
8 Press Tab to select the Enter New Character text field.
9 Type the new character or string and press Enter. A dialog
box appears asking if you want to commit your new entry to
permanent storage.
10 Select Yes or No and press Enter.
Programming a Virtual Key or Unicode Character
You can program any virtual key or Unicode character to any
key or modified key combination.
To program a virtual key or Unicode character
1 Start the reprogrammable keypad utility.
2 Press the key you want to reprogram twice. The hexadecimal
scan code for the key appears in both fields.
3 Press Enter. The select modifiers dialog box appears.
To Next Page
Loading...
