Intermec CK30

Chapter 1 — Using the CK30 Handheld Computer
30 CK30 Handheld Computer User’s Manual
3 Gently insert the SD card into the CK30 with the printed
side facing the keypad and screen side of the CK30.
SD card
CK30
SD card
retainer
4 Push the card into the slot until it latches in place and the
steel card retainer covers the end of the SD card.
5 To verify that the SD card is seated correctly, press I to turn
on the CK30.
• If the SD card is bootable, the CK30 should boot from the
card. If not, see page 127 for troubleshooting help.
• You should be able to navigate to the SDMMC Disk
folder to see the contents of the SD card. If not, see page
127 for troubleshooting help.
6 Replace the door, making sure to insert the door catch into
the slot above the steel card retainer.
SD card
retainer
Door
catch
Screw
(2 places)
Door
7 Replace the two screws.
8 Press I to turn on the CK30.
9 (Optional) Navigate to the SDMMC Disk folder to see the
contents of the SD card.