Chapter 2 — Configuring the CK30
CK30 Handheld Computer User’s Manual 47
PC
Ethernet
Serial cable
CK30
Host
CK30 in a Serial Network
To use serial communications with your CK30
1 Turn off the CK30.
2 Connect the CK30 to the serial port of another device. You
can do this in one of the following ways:
• Connect the CK30 serial port to the serial port of the other
device using the AA1 (26-pin to DB9-pin) serial cable
adapter and a female-to-female null modem RS-232 cable.
• Connect the AD1 or AD2 communications dock to the
serial port of the other device using a DB9-pin to DB9-pin
serial adapter cable. Insert the CK30 into the dock.
3 Turn on the CK30.
To Next Page
Loading...
