Intermec CK30

Chapter 2 — Configuring the CK30
72 CK30 Handheld Computer User’s Manual
15 Press Enter to close the Success message box.
16 Configure your CK30 for WPA, WPA2, or 802.1x security.
To load multiple certificates
1 Create the \Temp\Root and the \Temp\User folders on the
CK30.
2 Copy at least one root certificate .cer file into the
\Temp\Root folder.
3 Copy at least one user certificate .cer file and key .pvk file into
the \Temp\User folder. Each pair of filenames must match
(for example, cert1.cer and cert1.pvk).
4 From the Configuration Utility, select Communications >
802.11 Radio > Certificates. The Certificates screen appears.
Note: The Import Root Certificate and Import User
Certificate functions are also available in Intermec Settings.
5 Select Import Root Certificates. The Import Root Certific
screen appears. Press U to select True and press Enter to save
the change. You return to the Certificates screen.
6 Select Import User Certificates. The Import User Certific
screen appears. Press U to select True and press Enter to save
the change. You return to the Certificates screen.
7 Press F3 to immediately import the certificates:
• All root certificates in \Temp\Root are imported into the
Trusted Authorities certificate store.
Note: You are prompted when a root certificate is
imported, unless that certificate is already in the store.