Intermec EasyCoder PC4 - Easycoder PC4 Specifications

4 Intermec EasyCoder PC4—Service Manual
Chapter 1—Models and Options
1.3 EasyCoder PC4 Specifications
Printing
Print Technique ermal Transfer and/or Direct ermal
Printhead Resolution
203.2 dpi (8 dots/mm) or
300 dpi (11.81 dots/mm)
Print Speed (selectable) 30, 40, 50, 75 or 100 mm/sec.
(1.2,1.6, 2, 3 or 4 in/sec.)
Print Width (max) at 203.2 dpi 104 mm (4.1 inches) = 832 dots
Print Width (max) at 300 dpi
102.2 mm (4.02 inches) = 1208 dots
Print Length (min/max) at 203.2 dpi 6.35/472.5 mm (0.25/18.6 inches) Standard (no cartridge)
Print Length (min/max) at 300 dpi
6.35/220.0 mm (0.25/8.66 inches) Standard (no cartridge)
Media Width (min/max)
25.4 to 118 mm (1.00 to 4.65 inches)
Media ickness (min)
0.06 mm (0.003 inches)
Media ickness, rolls (max)
0.15 mm (0.006 inches)
Media ickness, fan-folds (max) 0.17 mm (0.006 inches)
Media Roll Diameter (max) 127 mm (5.0 inches)
Media Roll Core Diameter 25.4 or 38.1 mm (1.0 or 1.5 inches)
Ribbon Width (min/max)
33 to 110 mm (1.33 to 4.33 inches)
Ribbon Roll Diameter, Outer (max)
41 mm (1.6 inches)
Ribbor Roll Core Diameter, Inner 13 mm (0.5 inches)
Print Directions 4
Modes of operation
Tear Off (Straight-through) Yes
Peel Off (Self-strip) Yes
Firmware
Operating System Intermec ESim v6.xx
Fonts 5 resident
Font Magnification Horizontal max 8 times, vertical max 9 times
Built-in Bar Code Symbologies
33
Physical Measures
Dimensions (W
× L × H) 230 × 257 × 167 mm
(9.06 × 10.11 × 6.58 inches)
Weight (excluding PSU and media) Approx. 2.3 kg (5 pounds) Depending on model
Ambient Operating Temperature
+5°C to +40°C (+41°F to +104°F)
Ambient Storage Temperature
-20°C to +50°C (-4°F to +122°F)
Humidity
10 to 90% non-condensing
Electronics
Microprocessor 16-bit 20 MHz (16M of address space)
On-board Flash memory 1024K (774K firmware, 250K available to user)
On-board RAM memory 2048K (576K firmware, 1050K print buffer)
Power Supply Unit Separate unit
Input Voltage 100 to 240 VAC, 50 to 60Hz, 1.9A
Output Voltage 24 VDC, 3.0A
Input Voltage (mobile applications) 23.5 VDC ± 0.5V, 6A peak No PSU connected