6b
5
6c
6a
42 EasyCoder PX6i User’s Guide (Fingerprint version)
Chapter 5 — Thermal Transfer Printing
Ribbon Load, cont.
In case of 110 mm (4.3 inches) ribbon
width, compress the ribbon supply
bobbin and move it so it snaps into the
third groove.
In case of 76 to 90 mm (3 to 3.5 inches)
ribbon width, compress the ribbon
supply bobbin and move it so it snaps
into the second groove.
In case of 130 mm (5.1 inches) ribbon
width, compress the ribbon supply
bobbin and move it so it snaps into the
fourth groove.
Unpack a roll of original Intermec
thermal transfer ribbon.
To Next Page
Loading...
