Intermec SR61 - Connecting the SR61 to a Host Device

Chapter 2 — Connecting and Configuring the SR61
14 SR61 Cordless Scanner User’s Guide
Connecting to a Host PC With the USB or RS-232 Bluetooth Adapter
1 Install the USB Bluetooth adapter (P/N 203-771-xxx) or
RS-232 Bluetooth adapter (P/N 203-768-xxx) and software
on your host PC.
2 Connect and pair your SR61 with your host PC.
For help, see the instructions that ship with the adapter.
To disconnect from a host PC
•Scan this bar code:
Bluetooth Device Disconnect
\60\02\52\05\00\00\06\00\00\00\00\00\00\00\00\00
The SR61 disconnects from your host PC, emits a series of
beeps from high to low, and the blue Intermec Ready-to-
Work indicator turns off.
Connecting as a Keyboard Wedge
You can connect your SR61 to your host PC as a keyboard
wedge. Connecting as a keyboard wedge lets your host PC receive
data from the SR61 as it would from a keyboard. You can use one
of these applications:
• Keyport™ Bluetooth is a keyboard wedge application that
communicates from your host PC directly to the SR61.
Keyport Bluetooth runs on Windows XP with SP2.
• Keyport Lite is a keyboard wedge application that supports
English QWERTY keyboards. Keyport Lite runs on Windows
2000.
To order Keyport Bluetooth or Keyport Lite, contact your local
Intermec representative.
Connecting Using Keyport Bluetooth
1 Connect your SR61 to your host PC running Windows XP
with SP2 or later. For help, see the previous section,
“Connecting to a Host PC With the USB or RS-232
Bluetooth Adapter.”