Chapter 4 — Configuration Command Reference
52 SR61 Cordless Scanner User’s Guide
Timeout Between Identical Consecutive Codes
Use this command to invalidate a second bar code read that
occurs before the timeout expires. Use this command when
scanning bar codes with identical data as opposed to the Timeout
Between Different Consecutive Codes command that you use
when your bar codes contain different data.
You can set Timeout Between Identical Consecutive Codes to a
value from 0 to 2550 ms.
TLC 39
TLC 39 is a “composite” symbology designed for the
Telecommunications Industry. TLC 39 combines a Code 39
symbol, encoding a part number (for items such as plug-in
boards at central switching stations) with a “linked”
MicroPDF417 symbol encoding a serial number and other
optional information.
The first 6 characters must be numeric and include the ECI
number. The 7th character is a delimiter between the linear data
portion and the composite data portion, typically a comma, but
other delimiters are allowed. The next piece of data is a
mandatory unique Serial Number.
There can be other data fields after the Serial Number, usually
either AppIDs or DataIDs, which are governed by whether or not
there are alpha characters in the serial number. Country Of
Origin is another typical data field that is included in this
symbology.
Trigger Mode
SR61xV (linear imager) and SR61xA (area imager) only. Trigger
mode allows you to set different types of triggering for the
imager.
To Next Page
Loading...
