Chapter 4 — Configuration Command Reference
46 SR61 Cordless Scanner User’s Guide
Disable All Symbologies
This command disables all symbologies. Disabling all
symbologies does not reset symbology parameters to their default
values. To reset all symbology parameters to their default factory
settings, use the Administrator Reset Factory Defaults command.
For more information, see “Administrator Reset Factory
Defaults” on page 39.
DutchPost
Enables or disables decoding of DutchPost symbology.
DutchPost is a 4-state bar code that contains addressing, as well
as customer-specific information.
EAN.UCC Composite
Enables or disables EAN.UCC Composite symbology. An
EAN.UCC Composite symbol consists of a linear component
(encoding the item's primary identification) associated with an
adjacent 2D Composite Component (encoding supplementary
data, such as a batch number or expiration date). The Composite
symbol always includes a linear component so that the primary
identification is readable by all scanning technologies, and so that
2D imagers can use the linear component as a finder pattern for
the adjacent 2D Composite Component.
Error Beep
Enables or disables the error beep. When you scan a
configuration bar code that is damaged or unknown, you hear an
error beep, and the configuration of the SR61 is not changed.
Good Read Beep Duration
Sets the length of the SR61 good read beeps. You can set Good
Read Beep Duration to a value from 0 (off) to 2550 ms.
Use Good Read Beep Duration in combination with Beep
Volume and Beep Frequency to define beeps according to
operator preference and work environment.
Good Read Beep Number
Determines the number of beeps used for the good read beep: 1,
2, or none.
To Next Page
Loading...
