Chapter 4 — Configuration Command Reference
SR61 Cordless Scanner User’s Guide 41
Bluetooth Device Name
Sets the name of the scanner. If the scanner is in a discoverable
state, its Bluetooth device name is available to host computers
during device discovery.
Bluetooth Device Page
If your SR61 is within Bluetooth communication range of your
host PC and Bluetooth Pageable Mode is enabled, you can send
this command from EasySet to page the SR61. For help, see
“Paging the SR61” on page 29.
Bluetooth Discoverable
Determines the discoverable state of the SR61. When the SR61 is
discoverable, it is visible to other Bluetooth devices in
communication range.
Bluetooth Pageable Mode
Enables or disables the Bluetooth Device Page command.
When Bluetooth Pageable Mode is enabled, the SR61 maintains
Bluetooth communication with your host device so that you can
use the Bluetooth Device Page command to page the SR61. For
help, see “Paging the SR61” on page 29.
When Bluetooth Pageable Mode is disabled, the SR61 turns
off and disconnects after 30 minutes of inactivity. Disabling
Bluetooth Pageable Mode also saves battery power.
Bluetooth Discoverable States
State Description
Fully The SR61 is discoverable to Bluetooth management
applications.
Limited The SR61 is discoverable to Bluetooth management
applications for 30 seconds.
Not The SR61 is not discoverable to Bluetooth management
applications.
Note: The SR61 is not discoverable when it is connected to a host
device.
To Next Page
Loading...
