Chapter 4 — Configuration Command Reference
SR61 Cordless Scanner User’s Guide 47
Good Read Beep Timing
Determines if the good read beep happens before or after
successfully transmitting data.
Good Read LED Duration
Sets the amount of time the green Status light stays on after a
good read. You can set Good Read LED Duration to a value from
0 (off) to 5110 ms. When the Status light is on due to a long
duration time, the SR61 can still read new bar codes and receive
commands.
Interleaved 2 of 5
Enables or disables decoding of Interleaved 2 of 5 symbology.
Interleaved 2 of 5 is a high-density, self-checking, continuous
numeric symbology. It is mainly used in inventory distribution
and the automobile industry.
JapanPost
Enables or disables decoding of JapanPost symbology. JapanPost
is a 4-state code and is a simple and efficient postal bar coding
scheme.
Lighting Goal
SR61xA (linear imager) only. The lighting goal is the average
light intensity that the SR61 tries to achieve when capturing an
image. Do not change this setting without assistance from a
representative from the Intermec Engineering Department.
Matrix 2 of 5
Enables or disables decoding of Matrix 2 of 5 symbology. Matrix
2 of 5 is a discrete bar code derived from Code 11.
ChinaPost is available as part of the Matrix 2 of 5 symbology
start/stop code. ChinaPost encodes 11 digits with no check digit
and has unique start and stop patterns.
Maxicode
SR61xA (area imager) only. Enables or disables decoding of
Maxicode symbology. Maxicode is a fixed 2D symbology that
contains an array of hexagons arranged around a circular pattern.
It is mostly used in package sorting and tracking applications.
To Next Page
Loading...
