Chapter 2 — Connecting and Configuring the SR61
18 SR61 Cordless Scanner User’s Guide
You can configure the SR61:
• using EasySet version 5.4.1 or later.
• remotely from your Intermec computer.
Configuring the SR61 With EasySet
EasySet is an Intermec configuration application that provides
you with two ways to configure the SR61:
• Send configuration commands from EasySet directly to the
SR61.
• Send configuration commands to a bar code setup sheet. You
can scan the bar codes onscreen with your SR61xA or
SR61xV, or you can print the setup sheet and scan the bar
codes. You do not need a Bluetooth connection to use this
method.
To configure the SR61 by sending commands from EasySet
1 Establish a Bluetooth connection with your host PC.
2 Start EasySet. The first time you start EasySet, the Select
product dialog box appears.
If the Select product dialog box does not appear, choose
Product > Select.
3 Select the SR61.
4 Select Communication > Connect. The Online Setup dialog
box appears.
5 Select the COM port that your SR61 is using for Bluetooth
communications, and click OK.
EasySet connects to your SR61 and retrieves the current
configuration of the SR61.
6 In the Commands window, choose configuration command
settings for your SR61.
Your SR61 is updated with the new configuration command
settings, and the settings are added to the bar code setup sheet.
Note: The SR61 does not beep when you send configuration
commands online from EasySet.
To Next Page
Loading...
