Chapter 4 — Configuration Command Reference
44 SR61 Cordless Scanner User’s Guide
ISBT 128
Enables and configures decoding of ISBT Code 128 symbology.
ISBT Code 128 is the global bar code labeling standard for the
blood banking industry. It is used to support the worldwide
distribution, tracking, and handling of blood bags and blood
components.
GTIN Processing for EAN 128
With GTIN processing enabled, a GTIN-compliant EAN 128
label will have the first two digits stripped and output 14 digits.
A GTIN (Global Trade Item Number)-compliant EAN 128
label:
1 is 16 digits long.
2 has "01" as the first two digits of the label.
Configuration Modes and Utilities
Use Configuration Modes and Utilities to:
• allow the SR61 to always accept configuration commands by
scanning bar codes or to timeout 1 minute after the last
configuration command is set by scanning a bar code.
• get the product version, sub-system versions, and Bluetooth
address of your SR61.
• page the SR61 from your host PC or turn off the SR61.
For more information and bar codes, see “Troubleshooting the
SR61” on page 24.
Code 128 Function Codes
Function Code Description
FNC1 FNC1 is used as a separator when multiple
identifiers and their fields are concatenated. For
example, FNC1 can be useful in keyboard wedge
mode when the GS character cannot be
transmitted.
FNC2 When the FNC2 character occurs in a bar code, the
SR61 temporarily stores the data from the bar code
and transmits it as a prefix to the next symbol. In
this way, FNC2 can be used to concatenate several
symbols before the data is transmitted.
To Next Page
Loading...
