Chapter 4 — Configuration Command Reference
SR61 Cordless Scanner User’s Guide 43
Codablock A
Enables or disables decoding of Codablock A symbology.
Codablock A is a 2D bar code that is an extension of Code 39.
If Code 39 is enabled with check digit, you cannot enable
Codablock A. For best results, disable Code 39 before you enable
Codablock A. If Code 39 is enabled with check digit, Codablock
A will not be decoded properly.
Codablock F
Enables or disables decoding of Codablock F symbology.
Codablock F is a 2D bar code that is an extension of Code 128. If
Code 128 is enabled with check digit, you cannot enable
Codablock F. For best results, disable Code 128 before you
enable Codablock F.
Code 11
Enables or disables decoding of Code 11 symbology. Code 11
is a very high-density, discrete numeric bar code. It is most
extensively used in labeling telecommunications components and
equipment.
Code 39
Enables or disables decoding of Code 39 symbology. Code 39 is
discrete, variable length, and self-checking. The character set is
uppercase A to Z, 0 to 9, dollar sign ($), period (.), slash (/),
percent (%), space ( ), plus (+), and minus (-).
Code 93/93i
Enables or disables decoding of Code 93/93i symbology. Code
93/93i is a variable length, continuous symbology that uses four
element widths.
Code 128 / EAN 128
Enables or disables decoding of Code 128 / EAN 128 symbology.
Code 128 is a very high-density alphanumeric symbology that
supports the extended ASCII character set. It is a variable length,
continuous code that uses multiple element widths.
Code 128 supports the following function codes.
To Next Page
Loading...
