INVT Goodrive 35 Series - Page 205

Goodrive35 inverters Basic operation instruction
204
Function
code
Name
Detailed instruction of parameters
Default
value
is valid
3:Neither ∧/∨ keys nor digital
potentiometer adjustments are valid
LED tens: frequency control selection
0:Only valid when P00.06=0 or P00.07=0
1:Valid for all frequency setting manner
2:Invalid for multi-step speed when
multi-step speed has the priority
LED hundreds: action selection during
stopping
0:Setting is valid
1:Valid during running, cleared after
stopping
2:Valid during running, cleared after
receiving the stop command
LED thousands: ∧/∨ keys and digital
potentiometer Integral function
0:The Integral function is valid
1:The Integral function is invalid
P08.43
Integral ratio of the keypad
potentiometer
0.01~10.00Hz/s
0.10 Hz/s
P08.44
UP/DOWN terminals
control
0x00~0x221
LED ones: frequency control selection
0:UP/DOWN terminals setting valid
1:UP/DOWN terminals setting valid
LED tens: frequency control selection
0:Only valid when P00.06=0 or P00.07=0
1:All frequency means are valid
2:When the multi-step are priority, it is
invalid to the multi-step
LED hundreds: action selection when
stop
0x000
www.barghmaher.ir