Goodrive35 inverters Appendix C
312
Dimension drawings Appendix C
C.1 What this chapter contains
Dimension drawings of the Goodrive35 are shown below. The dimensions are given in
millimeters and inches.
C.2 Keypad structure
C.2.1 Structure chart
C.2.2 Installation bracket
Note: The external keypad can be fix by M3 screws directly or the installation bracket. The
installation bracket for inverters of 380V 1.5~30kW is optional, the installtaion bracket for
inverters of 380V 37~315kW and 660V 22~630kW is optional or substitutive by the external
standard one.
Installation bracket of the key (380V 1.5~315kW)(optional)
Installation bracket of the key (660V 22~630kW)(optional)
To Next Page
Loading...
