INVT Goodrive270 Series

Goodrive270 series VFD for fan and pump Product overview
-13-
Note:
 n = 1 or 3
 The parentheses "()" in the "VFD model" column are used to distinguish models when selecting
different product configurations. Please note that 11–22kW models can only be configured with
one from the built-in DC reactor (L1) and the built-in C2 filter.
 The rated output current is the output current when the output voltage is 380V.
 The data in the "Input current" column are measured at an input voltage of 380V. The data in "()"
are measured when a DC reactor is configured.
3.7 Structure
The VFD structure is shown in the following figure (taking the 380V 45kW VFD model as an example).
7
11
9
8
6
10
1213
3
4
1
5
2
Figure 3-5 Product structure
No.
Name
Description
1
Upper cover
Protects internal components and parts.
2
Keypad
For details, see section 5.2 Keypad operation.
3
Lower cover
Protects internal components and parts.
4
Expansion card
Optional. For details, see Appendix A Expansion card.
5
Baffle of control board
Protects the control board and install expansion cards.
6
Cooling fan
For details, see chapter 8 Maintenance.
7
Keypad interface
Connects the keypad.