ISE Sonos - Page 39

ise smart connect KNX Sonos
Configuration
Order No. 1-0001-002
Product Manual Page 39 (76)
Object
Name
Direction
Data width
DP type
Flags
(CRWTU)
29 (group 1)
129 (group 2)
229 (group 3)
329 (group 4)
429 (group 5)
Last error
Read
14 bytes
16.001
CR-T-
Rubric:
Error diagnosis
Data type:
Character (ISO 8859-1)
Function:
Group 1/2/3/4/5 – The last error as text in music player communication
Description:
Supplies information on the last registered error as 14-byte text:
"OK" = No error/Success
"no IP" = Device has no connection to IP network
"network err" = UPnP network error (Sonos device not responding)
"UPnP err" = UPnP protocol error (Sonos device responds with error or
unexpected reply)
"playlist" = Playlist not available
"empty slot" = Empty playlist slot
Object
Name
Direction
Data width
DP type
Flags
(CRWTU)
30 (group 1)
130 (group 2)
230 (group 3)
330 (group 4)
430 (group 5)
Sonos group slave state
Read
1 bit
1.001
CR-T-
Rubric:
Error diagnosis
Data type:
Switching
Function:
Group 1/2/3/4/5 – Indicates whether the music player is currently used as slave
in a group
Description:
Supplies information on whether the playback device is used as a slave in a
Sonos group. 1 = Is slave, 0 = Is not slave
Object
Name
Direction
Data width
DP type
Flags
(CRWTU)
31 (group 1)
131 (group 2)
231 (group 3)
331 (group 4)
431 (group 5)
Leave slave mode
Write
1 bit
1.017
C-W--
Rubric:
Slave mode
Data type:
Trigger
Function:
Group 1/2/3/4/5 – Music player becomes master if connected as slave to a
Sonos group
Description:
Enables the playback device to be disconnected from a Sonos group and
operated as a master device again.