ISE Sonos - Page 43

ise smart connect KNX Sonos
Configuration
Order No. 1-0001-002
Product Manual Page 43 (76)
The following KNX group objects are available for group support:
Object
Name
Direction
Data width
DP type
Flags
40 (Slave 1 – Group 1)
50 (Slave 2 – Group 1)
60 (Slave 3 – Group 1)
70 (Slave 4 – Group 1)
80 (Slave 5 – Group 1)
140 (Slave 1 – Group 2)
150 (Slave 2 – Group 2)
160 (Slave 3 – Group 2)
170 (Slave 4 – Group 2)
180 (Slave 5 – Group 2)
240 (Slave 1 – Group 3)
250 (Slave 2 – Group 3)
260 (Slave 3 – Group 3)
270 (Slave 4 – Group 3)
280 (Slave 5 – Group 3)
340 (Slave 1 – Group 4)
350 (Slave 2 – Group 4)
360 (Slave 3 – Group 4)
370 (Slave 4 – Group 4)
380 (Slave 5 – Group 4)
440 (Slave 1 – Group 5)
450 (Slave 2 – Group 5)
460 (Slave 3 – Group 5)
470 (Slave 4 – Group 5)
480 (Slave 5 – Group 5)
Slave 1/2/3/4/5 – Group
control
Write
1 bit
1.001
C-W--
Rubric:
Slave group control
Data type:
Switching
Function:
Group 1/2/3/4/5 – Add slave 1/2/3/4/5 to this group
Description:
Connects the Sonos slave to the master in a group (1) or terminates
the group connection of the slave (0).