ISE Sonos - Page 44

ise smart connect KNX Sonos
Configuration
Order No. 1-0001-002
Product Manual Page 44 (76)
Object
Name
Direction
Data width
DP type
Flags
41 (Slave 1 – Group 1)
51 (Slave 2 – Group 1)
61 (Slave 3 – Group 1)
71 (Slave 4 – Group 1)
81 (Slave 5 – Group 1)
141 (Slave 1 – Group 2)
151 (Slave 2 – Group 2)
161 (Slave 3 – Group 2)
171 (Slave 4 – Group 2)
181 (Slave 5 – Group 2)
241 (Slave 1 – Group 3)
251 (Slave 2 – Group 3)
261 (Slave 3 – Group 3)
271 (Slave 4 – Group 3)
281 (Slave 5 – Group 3)
341 (Slave 1 – Group 4)
351 (Slave 2 – Group 4)
361 (Slave 3 – Group 4)
371 (Slave 4 – Group 4)
381 (Slave 5 – Group 4)
441 (Slave 1 – Group 5)
451 (Slave 2 – Group 5)
461 (Slave 3 – Group 5)
471 (Slave 4 – Group 5)
481 (Slave 5 – Group 5)
Slave 1/2/3/4/5 – Group
state
Read
1 bit
1.001
CR-T-
Rubric:
Slave group control
Data type:
Switching
Function:
Group 1/2/3/4/5 – Indicates whether slave 1/2/3/4/5 is added to this
group
Description:
Supplies information on whether the slave is linked to the master in a
group (1) or not (0).