Digital Network Public Address & Voice Alarm System
1. The host short circuit activation: Trigger related event configuration when host connection interfaces
has emergency event.
2. The mixer Amplifier & Changeover Contact Configuration: Trigger related event configuration when
setting the mixer amplifier& Changeover has emergency event.
7.2.1.Host Short circuit configuration
Configure the actions host will trigger when emergency occurs. System will run related pre-set program of
host trigger when emergency occurs on host online interface.
Each host has eight trigger outputs, each trigger outputs can be individually configured. The system will
perform pre-configured contact the appropriate action when an emergency occurs.
Step 1: Click "Host 1" under sub-node of "contact Host Configuration". Configuration detailed information
box will be listed on the right of configuration box, (if there are two hosts in the system, please select
"Host 2" )
Step 2: Click the right [...] sub-menu item button on zone control list box of Host 1. "Zone Editor"
Configure list box will be popped out.
To Next Page
Loading...