ITech IT-M7700 Series User Manual

Inspection and Installation
2 Inspection and Installation
♦ Verifying the Shipment
♦ Instrument Size Introduction
♦ Connecting the Power Cord
♦ Connecting the Device Under Test (DUT)
♦ Connecting the Interface
2.1 Verifying the Shipment
Unpack the box and check the contents before operating the instrument. If
wrong items have been delivered, if items are missing, or if there is a defect with
the appearance of the items, contact the dealer from which you purchased the
instrument immediately.
Table 2–1 Package box contents
Item
Qty.
Model Remarks
Programma-
ble AC Power
Source
- IT-M7700
series
This series include: IT-M7721/IT-
M7722/IT-M7721L/IT-M7722L/IT-
M7723/IT-M7722D/IT-M7723D/IT-
M7722E/ IT-M7723E
Power Cord X 1 - User may select an appropriate power
cord that matches the specifications of
power socket used in the area. See the
Section 2.3 Connecting the Power
Cord for details.
Multiple in-
struments
connection
cables
X 1 IT-E251 When the user needs to connect the
System Bus interfaces between Multi-
ple instruments in series operation,
multichannel operation and three-
phase operation features, this option is
the right choice.
Ex-Factory
Test Report
X 1 - It is the test report of the instrument be-
fore delivery.
Copyright © Itech Electronic Co., Ltd.
20

ITech IT-M7700 Series Specifications

General

Brand	ITech
Model	IT-M7700 Series
Category	Portable Generator
Language	English