Operation and Application
Parameter Factory default value
• IT-M7722L/IT-M7722: 6.3A
• IT-M7723(V Range = High): 6.3A
• IT-M772(V Range = lOW) 12.6A
• IT-M7723D: 7.875A
• IT-M7722E: 10.5A
• IT-M7723E: 15.75A
OCP-Min 0.00A
Function menu
(IT-M7721L/IT-M7722L does not support this function.)
List Mode Off
List Trigger
Off
Dimmer Off
Surge Trap
Off
Ext IO1 Off
Ext IO2
Off (IT-M7723 does not support this function.)
Off Timer Off
4.11.7 View the System Information
This menu item is used to view the system information of the instrument. The
procedures to view the system information are as follows.
1. Press the composite keys [Shift] + [DC](System) to enter into the system
menu interface.
2. Rotate the knob to select System Info and press [Enter] key to confirm.
3. Rotate the knob to page up and down and check the instrument system in-
formation. Specific parameters are shown in the table below:
Name Description
Manufacturer Display the manufacturer's name.
Model Display the instrument model.
Version Display the software version.
Serial Number Display the serial number.
Copyright © Itech Electronic Co., Ltd.
85
To Next Page
Loading...
Need help?
General
