Inspection and Installation
below. If purchased model fails to meet local voltage requirements, please
contact distributor or factory for change.
China
IT-E171
United States &
Canada & Japan
IT-E172
Europe
IT-E173
England
IT-E174
Connecting Method:
1. Make sure that the front-panel power switch is in the Off position.
2. Connect the female end of the supplied line cord to the AC receptacle on
the rear panel.
3. Connect the plug of the power cord to a grounded AC outlet.
• IT-M7723/IT-M7723D/IT-M7722E/IT-M7723E power supply provides the
standard power cords as below.
Connecting Method:
Copyright © Itech Electronic Co., Ltd.
25
To Next Page
Loading...
