JA-101K(-LAN)(-LAN3G) and JA-106K(-3G)
Security System Control Panels 106 / 110 MLJ51410
15 MyJABLOTRON web application
The Jablotron web application is a unique service that provides users and installation technicians with online
access to devices produced by Jablotron. Jablotron customers can use it for administration of their systems.
End users of alarms can use it to control and monitor their device. It provides installation technicians with
a powerful tool that allows them to monitor and administer all installed alarms and to comfortably create
quotations for new installations.
Everything concerning your alarms or installation is available clearly in one application that is accessible from
anywhere.
The MyJABLOTRON application enables users to:
see the current status of an alarm (in the initial widget your registered devices are visible together
with the last registered event and the number of sections in the unset and set status)
set / unset an alarm or its part
control programmable outputs (most frequently for appliance control)
view history of events with the possibility to export it to a file
view and if allowed, take photos from verification devices
monitor the course of temperature in the building or outdoors (incl. notification of exceeding of the
lower or upper limit of set temperatures at a defined time of the day)
monitor consumption of electricity (incl. setting of a notification in case of exceeding the
hourly/daily/monthly consumption)
send messages to selected contacts by SMS, E-mail using the standard PUSH notifications for mobile
phones
and other useful functions
15.1 Management of installations and offers for an installation technician
Overview of all installed devices registered in MyJABLOTRON – Installation Management module
This is a unique tool for installation technicians, who can manage all their installed systems in one place, incl.
a complete overview of their current technical status, view of the history and operation diagnostics...
You will find the Installation Management module in your account in the MyJABLOTRON application
in the MyCOMPANY part (if supported in your region).
You can filter your installations by the alarm type or based on their current status. Thus, you can pre-set
notification for a technical problem and you can quickly respond to it with a service intervention. This way,
you can provide your customer with an above-standard service as you will contact him/her before the customer
To Next Page
