JAKA Zu MiniCab v1.1 33
Note: 1. Please do not set LAN2 network segment with the same IP address as LAN1 network segment,
otherwise you will be unable to log in.
2. If LAN2 must be set as 10.5.5.x, please contact JAKA technical service personnel to modify
LAN1 network port.
c) Reset Settings
When you forget the Wi-Fi name and password and cannot connect to MiniCab, this MiniCab supports
hardware reset. The Reset button is located at the side antenna and requires a long press of more than 10s for
Wi-Fi resetting. At this time, the Wi-Fi gateway address can be redirected. Please contact JAKA technical
service personnel for details.
To Next Page
Loading...
