JAKA Robot - Preservation of Components; Commitment of After-Sales Service

JAKA Zu MiniCab v1.1 37
1. In order to perform maintenance and inspection work, the power must be
turned on with the door of the robot electric control cabinet open, please do
not expose the inside of the robot electric control cabinet to direct sunlight,
searchlights, etc., otherwise it will cause malfunctions or wrong actions.
1. Before the operation, operators shall release the static electricity in advance.
2. Antistatic wrist bands are very effective.
3. Direct touching of electrical components without taking any precautions may
cause electrical components to malfunction
1. After the completion of the operation, it shall be confirmed that there is no
gap or cable clamped. After that, reinstall the shell. If there is a gap, dirt and
dust may enter the electric control cabinet, which will lead to malfunction.
7.3.1 Preservation of Components
According to the service life and service frequency of parts, it's recommended to divide spare parts into A
and B for management.
Maintenance Part·A: Major maintenance components prepared for daily maintenance and inspection
 A-1: Essential spare parts
 A–2: Parts regularly replaced/Spare parts recommended
Maintenance Part·B: Maintenance components prepared when purchasing multiple sets
 B-1: Parts purchased from JAKA
In order to maintain normal operation, A-1 and A-2 above mentioned are the minimum essential
components required. It is recommended to prepare 1 complete set. In addition, highly reliable components are
provided for printing substrates; please note the following points while keeping.
 Storage Temperature -10°C to +50°C
For long-term storage, in order to maintain its reliability, it is recommended to keep the temperature within
25℃±10℃. Avoid such a sudden temperature change if possible.
(10℃/h and above).
 Storage humidity 20 ~ 85%RH
For long-term storage, in order to maintain its reliability, it is recommended to keep the humidity within 45 ~
65%. Keep away from dew condensation or mildew.
 Anti-static
It is easy to generate static electricity when kept in extremely dry conditions. The shock of electrostatic
discharge may damage the semiconductor. Please store it in an anti-static bag.
 Other environment condition
Please keep it in an environment that does not produce poisonous gas, dirt and dust. Do not place heavy
objects on it during storage.
7.4 Commitment of After-sales Service