JAKA Zu MiniCab v1.1 39
Chapter 8 Quality Assurance
8.1 Product Quality Assurance
Without prejudice to any claim agreement that user (customer) may have with the distributor or retailer, the
Manufacturer shall provide the customer "Product Quality Assurance" on the terms set out below: If new
equipment and its components have defects due to poor manufacturing and/or materials within 12 months after
their commissioning (up to 15 months if transportation is included), JAKA shall provide necessary spare parts,
and the user (customer) shall be responsible for assign personnel to replace or repair related parts with another
part of the latest technology level. If the equipment defects are caused by improper handling and/or failure to
follow the relevant information described in the User Manual, this "Product Quality Assurance" shall be void.
This "Product Quality Assurance" does not apply to or extend to maintenance (such as installation,
configuration, software download) performed by an authorized distributor or user (customer). The user
(customer) must provide the purchase receipt and purchase date as valid evidence to enjoy the "Product
Quality Assurance". A claim under this "Product Quality Assurance" shall be filed within two (2) months after it
becomes apparent that the "Product Quality Assurance" has not been performed. The ownership of the device
or component that is replaced or returned to JAKA belongs to JAKA. Any other claims arising from or in
connection with the equipment are not covered by this "Product Quality Assurance". Nothing in this "Product
Quality Assurance" shall attempt to limit or exclude the legal rights of the user (customer) or the manufacturer's
liability for death or injury resulting from their negligence. The duration of this "Product Quality Assurance" shall
not be extended by the services provided under the terms of this "Product Quality Assurance". Without
prejudice to the principle of this "Product Quality Assurance", JAKA reserves the right to charge the user
(customer) for replacement or maintenance. The foregoing provisions do not imply a change in the burden of
proof to the detriment of the user (customer). In the event of defective equipment, JAKA shall not be liable for
any damage or loss resulting therefrom, including but not limited to production loss or damage to other
production equipment.
8.2 Disclaimer
JAKA is committed to improving the reliability and performance of our products and therefore reserve the
right to upgrade our products without prior notice. JAKA seeks to ensure the accuracy and reliability of the
contents of this manual, but is not responsible for any error or omission of information therein.
To Next Page
Loading...
