Jands Stage CL - Scenes; Recording a Scene; Playing a Scene

Scenes RecordingaScene

7. Scenes
Scenecontrols
In the scene control section there are 4 buttons an
This control… does this…
d a fader.
Scene Fader
The fader adjusts the overall level
being played
of all the scenes that are
1, 2 ,3 4,
The four buttons are used to play the
press a button the scene fades ov
time dial or at the time yo
scenes. When you
er the time set by the Live
u’ve saved with the scene
Re
To record a scene you do this:
ur lights using the 12 sets of fixture
her controls.
ct buttons light up to show
e scene. Any channel that is above 0%
t want to include in the
will flash red to
recorded to the
OR
e red LED in the button will flash if the
To play a scene you do this:
1. Press one of the four scene buttons to fade it in. The LED in the button
flashes slowly to show that the scene is contributing to the console output –
the look you see on stage.
cordingaScene
1. Set up the levels and colours for yo
channel controls, the colour swatches and any ot
2. Press the record button. The blue LEDs in the sele
which channels will be included in th
will be automatically selected
3. Press the select button(s) on any fixture you don’
scene.
4. Press one of the 4 scene buttons. The LED above the switch
indicate that the button is empty. If there is already a scene
button the LED will be solid blue.
5. Press one of the 12 flash buttons. Th
channel is empty and be on if there is already a scene recorded.
PlayingaScene
StageCLUserGuide,Version1.3 7‐1