Quickstart Switchingon
3. Quickstart
Once you’ve got your Stage CL system connected and powered up you can patch
2 pages of 12 fixtures (or groups of fixtures).
Even if you decide to get started without reading the rest of the manual please
take some time to familiarise yourself with the front panel controls and shortcuts:
Icon This control… does this…
Home Tap to go to the Home screen
Double tap to go back to the previous screen
Select Tap to select one fixture
Hold and press another to select (or deselect) a
range of fixtures
Used to link channels for colour selection and to
select channels when recording
Hue dial Turn to adjust colour
Press to cycle through a series of colours
Resets saturation if saturation is less than 100%
Saturation dial Turn to adjust saturation (tint)
Press to alternate between full, 50% and 0%
saturation
+
Shift + Hue Turn to adjust the assigned feature. In the
Stage CL library, if a fixture has Zoom it is
assigned to this control
Press to alternate between full, 50% and 0%
+
Shift +
Saturation
Turn to adjust the assigned feature. In the
Stage CL library, if a fixture has Strobe it is
assigned to this control
Press to alternate between full, 50% and 0%
x2
Double tap Shift
+ Hue
Fans hue across the selected fixtures. Fan
varies depending on which Hue dial you use
x2
Shift +
Saturation
Fans saturation across the selected fixtures.
Fan varies depending on which Saturation dial
you use
StageCLUserGuide,Version1.3 3‐1
To Next Page
Loading...
Need help?
General
