Jands Stage CL - Copying a Chase to Another Playback

Chases CopyingaChasetoanotherplayback

Movingandcopyingsteps
O use in
an
To do this:
2. Touch the Copy button at the bottom of the window.
een two existing ones select the step
ant
se tab button. Stage CL displays the Chases list window.
e
chscreen. Stage CL displays
uchscreen dial to delete the chase.
ding the Clear button and
want to delete.
playback
hase to another playback location by recording it while it is
play
1. P ay
2. Pres
will corded there.
3. Press the button where you want to copy the chase. You can copy a chase to:
ften you’ll have a look in one of steps of a chase that you’d like to
other step. You can copy and move a step in the steps window.
1. Select the chase step by touching on it or by using the touchscreen dial to
scroll up or down the list.
3.
If you want to insert a new step betw
before the location you want to use and touch the Insert button. If you w
to add a new step at the end just select the New Step position.
4. Touch the Paste button.
DeletingaChase
If you don’t want to keep a chase you have recorded, you can delete it. To do
this:
1. Press the Cha
2. Touch the name of the Chase you want to delete or rotate the dial until th
scene name is highlighted.
3. Touch the Delete button at the bottom of the tou
the clear confirmation window.
4. Touch the confirm button or press the to
 You can also delete a chase by pressing and hol
then pressing the play button of the Chase you
CopyingaChasetoanother
You can copy a c
ing back. To do this:
l the Chase. If you only want to copy this chase and nothing else make
sure it is the only item playing.
s Record. The red LED in any Scene and Chase buttons that are empty
flash and will be on if there is already something re
StageCLUserGuide,Version1.3 9‐19