Abouttheconsolecontrols TheTouchscreen,DialandButtons
 The default for Stage CL is to only show 4 pages. You can adjust the number
of pages available in the Preferences tab of the Setup window. See Preferences
on page 11-3
Snapshot(akaHoldorFreeze)
Press this button to take a snapshot of the console output and hold that
output until the button is pressed again. Only the Grand Master and DBO
contro
ls have an effect on the Snapshot output.
e a snapshot then adjust any other controls, including the
ffecting the look on stage. Once you’ve got a new look
ready you press the snapshot button again and Stage CL crossfades to the new
This means you can tak
fixture control without a
look.
Fixtures‐Scenes
This button switches the 12 sets of fixture control to Scene mode. In Scene
mode the 12 faders and flash buttons can be used to record and play back scenes.
d
TheTouchscreen,DialandButtons
ncluding recording and
playing scenes, chases and a cuelist without using the touchscreen or the buttons
In Scene mode the LED in the Fixture / Scene button lights up in Re
For more information about recording scenes see Recording a Scene on page 7-1.
Once your fixtures are patched you can do most things, i
around it at all.
But by using the touchsreen you can access shortcuts, display information about
your show, edit what you’ve recorded and much more.
These touchscreen controls set consists of:
StageCLUserGuide,Version1.3 5‐5
To Next Page
Loading...
