Jands Stage CL - Page 64

Setup Setup&Preferences
This item… does this…
Networ
configuratio
k
n
tic IP Sets the network (Ethernet) port to either DHCP or Sta
mode
Sets the IP address of the console, when using a static IP. If
the console is set to DHC
IP Address P this field shows the address the
console has obtained from the DHCP server.
Netmask
hen using a static IP address.
Normally 255.255.255.0
Sets the subnet mask, w
Gateway Sets the gateway address when using a static IP address
Audio
sensitiv
ity
Sets the audio sensitivity of the Stage CLs inbuilt
microphone. Increase the value to allow the mic to pickup
softer sounds.
Sets the audio range of the Stage CLs inbuilt microphone.
Decrease the value to make the Stage CL respond to music
with less dynamic range.
Audio
Dynamics
LED Brightness
Adjusts the brightness of all LEDs on the front panel of the
Stage CL
LCD Brightness Adjusts the brightness of the LCD touchscreen.
Date Sets the date for the consoles clock.
Time Sets the time for the consoles clock.
Locking
Passcode
to lock and unlock the console. See Locking
Sets the code used
the console on page 14-3
Reset Console
here you can reset the console to its
all show files.
Opens a window w
default settings. This option deletes
Resettingthe
You can use the Set and
delete all saved show files. To do this:
option. Stage CL displays the Reset
console
up: Reset option to reset the console to its default settings
1. In the Setup window select the Reset
console window:
11‐2 StageCLUserGuide,Version1.3