Janome JR3403N-AC

Specifications
Desktop Robot JR3000
#sysIn1 –
#sysIn16
External Power Supply DC24V
COM-
(GND)
2.4K
COM +
(DC24V)
#sysIn1 –
#sysIn16
2.4K
Internal Power Supply DC24V
7.8 Input Signal (PNP)
 When using an external power supply
Input signals are treated as active when the photocoupler is ON.
When using an external power supply, the input signals become active when the input pin and the
external power supply ground are ON.
 When using an internal power supply (optional)
Input signals are treated as activate when the photocoupler is ON.
When using an internal power supply, the input signals become active when the input pin and COM+
pin are ON.
Assigning the wrong wiring to the I/O can damage the internal circuits.
56